Abstract: Krypton-85 and other radioactive noble gases are widely used for groundwater dating purposes. 85Kr analysis require large volumes of water to reach the analytical requirements. Conventionally, this water is pumped to the surface to be degassed with a gas extraction system. The large pumping rate may disturb the natural flow field and requires substantial field logistics. Hence, we propose a new in-situ degassing method, in which membrane contactors are used to degas the groundwater directly in the well and gas is collected at the surface. This way, field work is facilitated, groundwater system disturbance is minimized, and the gas sample is collected at a specific depth. We demonstrate the tightness of the system regarding atmospheric air contamination for a collection times of 24 h, which is sufficient for both low-level counting and laser-based counting methods for 85Kr. The minimal borehole diameter is 7.5 cm for the prototype presented in this research but can easily be reduced to smaller diameters. In a case study, we compare the results obtained with the new passive method with those from a conventional packer setup sampling. Additionally, 3H/3He samples were collected for both sampling regimes and the dating results were compared with those from 85Kr. A good agreement between tracer ages is demonstrated and the age stratigraphy is consistent with the expected age distribution for a porous unconfined aquifer. In addition, our study emphasizes the differences between the age information sampled with various methods. In conclusion, we demonstrate that the new in situ quasi-passive method provides a more representative age stratigraphy with depth in most cases.

Abstract: Integrating advanced simulation techniques and data analysis tools in a freeware Geographic Information System (GIS) provides a valuable contribution to the management of conjunctive use of groundwater (the world’s largest freshwater resource) and surface-water. To this aim, we describe here the FREEWAT (FREE and open source software tools for WATer resource management) platform. FREEWAT is a free and open source, QGIS-integrated interface for planning and management of water resources, with specific attention to groundwater. The FREEWAT platform couples the power of GIS geo-processing and post-processing tools in spatial data analysis with that of process-based simulation models. The FREEWAT environment allows storage of large spatial datasets, data management and visualization, and running of several distributed modelling codes (mainly belonging to the MODFLOW family). It simulates hydrologic and transport processes, and provides a database framework and visualization capabilities for hydrochemical analysis. Examples of real case study applications are provided.

Abstract: The Qanat water systems (QWSs), the ancient water engineering systems in Iran belonging to the very distant past, have harvested groundwater from drainages to convey it toward the surface with no use of energy. The present article highlights the socio-economic aspects of the sustainability of the QWSs and gives a satisfactory explanation of why the QWSs should be restored. In doing so, we subscribe to the view that indigenous and scientific knowledge should be incorporated. The former serves to tackle the restoration of the QWSs, the latter contributes to the distribution of water into the farmlands as efficiently as possible. Measured by (a) resilience, (b) reliability, (c) vulnerability, and (d) sustainability, the GIS technique made clear the performance of the QWSs has, therefore, the worst condition observed in terms of resiliency; the best condition observed concerning the vulnerability. Moreover, the QWSs have intermediate performance in terms of reliability. Finally, the sustainability index (SI) classifies the QWSs into different bands, which provide explicit support to take priority of the selection of the QWSs for restoration. In conclusion, a theoretical framework has been drawn to keep the QWSs sustainable.

Abstract: Acid in-situ leaching (ISL) can be used as a mining technique for in situ uranium recover from underground. Acids and oxidants as lixiviants were continuously injected into a sandstone-type uranium deposit in Bayan-Uul (China). It was conducted to facilitate the dissolution of uranium minerals to generate uranyl ions, which could then be extracted for the recovery of uranium resources by the pumping cycle. A reactive transport model based on PHAST was developed to investigate the dynamic reactive migration process of uranium. The simulated results well reproduce the fluid dynamic evolution in the injecting and pumping units, as well as the dynamic release of uranium. The simulated leaching area indicates that the uranium ore leaching area was much larger than the acidification area. In addition, the pollution plume of uranium and acid water was larger than that of the leaching area, which can be used as a reference for uranium mining schemes. Furthermore, the parameter sensitivity analysis indicates the volume fraction of uranium ore and the reaction rate were the main factors affecting uranium leaching efficiency. Without considering the blockage of pores by precipitation, the Fe2+ in the reinjection fluid had a significant negative influence on uranium leaching.

Abstract: Complex pyrite textures associated with large changes in isotopic and trace element compositions are routinely assumed to be indicative of multi-faceted processes involving multiple fluid and sulfur sources. We propose that the features of ore-stage pyrite from roll front deposits across the world, revealed in exquisite detail via high-resolution trace element mapping by LA-ICP-MS, reflect the dynamic internal evolution of the biogeochemical processes responsible for sulfate reduction, rather than externally driven changes in fluid or sulfur sources through time. Upon percolation of oxidizing fluids into the reduced host-sandstones, roll front systems become self-organized, with a systematic reset of their activity cycle after each translation stage of the redox interface down dip of the aquifer. Dominantly reducing conditions at the redox interface favor the formation of biogenic framboidal pyrite (δ34S from −30.5 to −12.5‰) by bacterial sulfate reduction and the genesis of the U mineralization. As the oxidation front advances, oxidation of reduced sulfur minerals induces an increased supply of sulfate and metals in solution to the bacterial sulfate reduction zone that has similarly advanced down the flow gradient. Hence, this stage is marked by increased rates of the bacterial sulfate reduction associated with the crystallization of variably As-Co-Ni-Mo-enriched concentric pyrite (up to 10,000′s of ppm total trace contents) with moderately negative δ34S values (from −13.7 to −7.5‰). A final stage of pyrite cement with low trace element contents and heavier δ34S signature (from −6.9 to +18.8‰) marks the end of the roll front activity cycle and the transition from an open to a predominantly closed system behavior (negligible advection of fresh sulfate). Blocky pyrite cement is formed using the remaining sulfate, which now becomes quickly heavy according to a Rayleigh isotope fractionation process. This ends the cycle by depleting the nutrient supplies for the sulfate-reducing bacteria and cementing pore spaces within the host sandstone, effectively restricting fluid infiltration. This internally-driven roll front activity cycle results in systematic, large S isotope and trace element fractionation. Ultimately, the long-time evolution of the basin and fluid sources control the metal endowment and evolution of the system; these events, however, are unlikely to be preserved by the roll front, as a direct result of its hydrodynamic nature.