|
|
Wang, W., Liang, X., Niu, Q., Wang, Q., Zhuo, J., Su, X., et al. (2023). Reformability evaluation of blasting-enhanced permeability in in situ leaching mining of low-permeability sandstone-type uranium deposits. Nuclear Engineering and Technology, 55(8), 2773–2784.
Abstract: It is essential to evaluate the blasting-enhanced permeability (BEP) feasibility of a low-permeability sandstone-type uranium deposit. In this work, the mineral composition, reservoir physical properties and rock mechanical properties of samples from sandstone-type uranium deposits were first measured. Then, the reformability evaluation method was established by the analytic hierarchy process-entropy weight method (AHP-EWM) and the fuzzy mathematics method. Finally, evaluation results were verified by the split Hopkinson Pressure Bar (SHPB) experiment and permeability test. Results show that medium sandstone, argillaceous sandstone and siltstone exhibit excellent reformability, followed by coarse sandstone and fine sandstone, while the reformability of sandy mudstone is poor and is not able to accept BEP reservoir stimulation. The permeability improvement and the distribution of damage fractures before and after the SHPB experiment confirm the correctness of evaluation results. This research provides a reformability evaluation method for the BEP of the low-permeability sandstone-type uranium deposit, which contributes to the selection of the appropriate regional and stratigraphic horizon of the BEP and the enhanced ISL of the low-permeability sandstone-type uranium deposit.
|
|
|
|
Pastukhov, A. M., Rychkov, V. N., Smirnov, A. L., Skripchenko, S. Y., & Poponin, N. A. (2014). Purification of in situ leaching solution for uranium mining by removing solids from suspension. Minerals Engineering, 55, 1–4.
Abstract: This study investigated the process of in situ leaching (ISL) method of uranium mining, and the removal of solid particles from the leaching solution. Investigations were carried out for 4months. The content of firm suspensions in the productive solutions arriving from the well field was up to standard of 3–5mg/l. After keeping in a settler of productive solutions within one hour concentration of suspensions decreases to 2–2.5mg/l. To increase the life of the wells requires more fine purification of the ISL solutions. The best results can be obtained but using filtration. Bag filters were used in experiments carried out at the extraction site. All samples of polypropylene bag filter was produced by the Tamfelt Corporation. The best results were obtained for fabrics S-51M03-L2K4 (pore size 3μm). After three month of trials following indicators of wells work were fixed: on the trial cell decrease in intake capacity did not occur; on the other cells of well field injectability of holes for the same period of time decreased for 15–40%. The results illustrated the high efficiency of this method, which allows injection wells to reach a constant intake capacity, making it possible for technological cells to achieve a constant productivity and balance. Purification of solutions allows to reduce acidulation term of new technological cells from 3–4 to 1.5–2months.
|
|
|
|
Zeng, S., Song, J., Sun, B., Wang, F., Ye, W., Shen, Y., et al. (2023). Seepage characteristics of the leaching solution during in situ leaching of uranium. Nuclear Engineering and Technology, 55(2), 566–574.
Abstract: Investigating the seepage characteristics of the leaching solution in the ore-bearing layer during the in situ leaching process can be useful for designing the process parameters for the uranium mining well. We prepared leaching solutions of four different viscosities and conducted experiments using a self-developed multifunctional uranium ore seepage test device. The effects of different viscosities of leaching solutions on the seepage characteristics of uranium-bearing sandstones were examined using seepage mechanics, physicochemical seepage theory, and dissolution erosion mechanism. Results indicated that while the seepage characteristics of various viscosities of leaching solutions were the same in rock samples with similar internal pore architectures, there were regular differences between the saturated and the unsaturated stages. In addition, the time required for the specimen to reach saturation varied with the viscosity of the leaching solution. The higher the viscosity of the solution, the slower the seepage flow from the unsaturated stage to the saturated stage. Furthermore, during the saturation stage, the seepage pressure of a leaching solution with a high viscosity was greater than that of a leaching solution with a low viscosity. However, the permeability coefficient of the high viscosity leaching solution was less than that of a low viscosity leaching solution.
|
|
|
|
Zeng, S., Shen, Y., Sun, B., Tan, K., Zhang, S., & Ye, W. (2022). Fractal kinetic characteristics of uranium leaching from low permeability uranium-bearing sandstone. Nuclear Engineering and Technology, 54(4), 1175–1184.
Abstract: The pore structure of uranium-bearing sandstone is one of the critical factors that affect the uranium leaching performance. In this article, uranium-bearing sandstone from the Yili Basin, Xinjiang, China, was taken as the research object. The fractal characteristics of the pore structure of the uranium-bearing sandstone were studied using mercury intrusion experiments and fractal theory, and the fractal dimension of the uranium-bearing sandstone was calculated. In addition, the effect of the fractal characteristics of the pore structure of the uranium-bearing sandstone on the uranium leaching kinetics was studied. Then, the kinetics was analyzed using a shrinking nuclear model, and it was determined that the rate of uranium leaching is mainly controlled by the diffusion reaction, and the dissolution rate constant (K) is linearly related to the pore specific surface fractal dimension (DS) and the pore volume fractal dimension (DV). Eventually, fractal kinetic models for predicting the in-situ leaching kinetics were established using the unreacted shrinking core model, and the linear relationship between the fractal dimension of the sample’s pore structure and the dissolution rate during the leaching was fitted.
|
|
|
|
Zeng, S., Shen, Y., Sun, B., Zhang, N., Zhang, S., & Feng, S. (2021). Pore structure evolution characteristics of sandstone uranium ore during acid leaching. Nuclear Engineering and Technology, 53(12), 4033–4041.
Abstract: To better understand the permeability of uranium sandstone, improve the leaching rate of uranium, and explore the change law of pore structure characteristics and blocking mechanism during leaching, we systematically analyzed the microstructure of acid-leaching uranium sandstone. We investigated the variable rules of pore structure characteristics based on nuclear magnetic resonance (NMR). The results showed the following: (1) The uranium concentration change followed the exponential law during uranium deposits acid leaching. After 24 h, the uranium leaching rate reached 50%. The uranium leaching slowed gradually over the next 4 days. (2) Combined with the regularity of porosity variation, Stages I and II included chemical plugging controlled by surface reaction. Stage I was the major completion phase of uranium displacement with saturation precipitation of calcium sulfate. Stage II mainly precipitated iron (III) oxide-hydroxide and aluminum hydroxide. Stage III involved physical clogging controlled by diffusion. (3) In the three stages of leaching, the permeability of the leaching solution changed with the pore structure, which first decreased, then increased, and then decreased.
|
|
