| Home | << 1 2 3 >> |
|
Seidl, C., Wheeler, S. A., & Page, D. (2024). Understanding the global success criteria for managed aquifer recharge schemes. Journal of Hydrology, 628, 130469.
Abstract: Water availability and quality issues will only gain importance in the future, with climate change impacts putting increasing pressure on global water resources. Dealing with these challenges requires drawing on all available water management tools, including Managed Aquifer Recharge (MAR). Although MAR has seen increasing global implementation during the last half a century, it is still often overlooked as a management tool. While technical, bio-physical, and hydrogeological aspects of MAR are well researched, this cannot be said for socio-economic and other governance factors. Where information is available, this study seeks to understand the conditions necessary for MAR success. We apply fuzzy-set Qualitative Comparative Analysis on 313 world MAR applications, and also model separately for high- and low-middle-income countries. Results show that sophisticated hydrogeological site understanding and scheme operation is paramount for MAR success, as is utilizing natural water sources for high value end uses. Successful high-income country MAR schemes tend to be large and utilize natural water sources and sophisticated water injection and treatment methods to augment potable water supply; while successful low-middle-income country schemes are not large, older than 20 years, and use gravity infiltration methods and (limited) no water treatment. These findings will help inform the future suitability of MAR application design and its likely success within various contexts.
|
|
Hubbard, B. E., Gallegos, T. J., Stengel, V., Hoefen, T. M., Kokaly, R. F., & Elliott, B. (2024). Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain. Journal of Geochemical Exploration, 257, 107370.
Abstract: VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey’s (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite. Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.
|
|
Marteleto, T. de P., Abreu, A. E. S. de, Barbosa, M. B., Yoshinaga-Pereira, S., Bertolo, R. A., & Enzweiler, J. (2024). Groundwater apparent ages and isotopic composition in Crystalline, Diabase and Tubarão aquifers contact area in Campinas, Southeastern Brazil. Journal of South American Earth Sciences, 135, 104783.
Abstract: This study refines the hydrogeological conceptual model of an area with three interconnected aquifers, namely the Crystalline Aquifer System (CAS – igneous and metamorphic rocks), which is in contact with the Tubarão Aquifer System (TAS – sedimentary rocks) and the Diabase Aquifer System (DAS – diabase rocks). The detailed investigation involved geophysical logging and hydraulic and hydrodynamic characterization with straddle packers in a local tubular well, in which groundwater presents high uranium concentrations. Hydrogeochemical and isotope (δ2H, δ18O, 3H, δ13C, 14C) analysis in this well and in other three neighboring wells, with lower U concentrations, showed that ancient and modern waters (3H from <0.8 to 1.12 TU, 14C from 69.43 to 78.72 pMC) mix within the aquifer. During groundwater pumping, vertical fractures in the diabase aquifer possibly induce water mixing and recharge of the deeper levels of the aquifers from shallow layers. The high [U] are related to ancient waters from a confined aquifer hosted in CAS that reaches the wells through hydraulically active fractures located deeper than 159 m depth. Groundwater apparent ages do not increase systematically with depth, revealing a complex circulation model for CAS. The results obtained from the other wells, which are all located on drainage lineaments, reveal that one extracts modern water from DAS and TAS, another one extracts modern and ancient water from DAS and CAS, and the third extracts only ancient water from CAS, confirming the complexity of the local hydrogeology. Regarding regional groundwater management, the study revealed the need to characterize the sources of groundwater in each well, in order to protect modern waters from anthropogenic contamination and to protect ancient groundwater from overexploitation, as CAS hosts groundwaters recharged thousands of years ago or more.
|
|
Ola, I., Drebenstedt, C., Burgess, R. M., Mensah, M., Hoth, N., Okoroafor, P., et al. (2024). Assessing petroleum contamination in parts of the Niger Delta based on a sub-catchment delineated field assessment. Environmental Monitoring and Assessment, 196(6), 585.
Abstract: The Niger Delta in Nigeria is a complex and heavily contaminated area with over 150,000 interconnected contaminated sites. This intricate issue is compounded by the region’s strong hydrological processes and high-energy environment, necessitating a science-based approach for effective contamination assessment and management. This study introduces the concept of sub-catchment contamination assessment and management, providing an overarching perspective rather than addressing each site individually. A description of the sub-catchment delineation process using the digital elevation model data from an impacted area within the Delta is provided. Additionally, the contamination status from the delineated sub-catchment is reported. Sediment, surface water and groundwater samples from the sub-catchment were analyzed for total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs), respectively. Surface sediment TPH concentrations ranged from 129 to 20,600 mg/kg, with subsurface (2-m depth) concentrations from 15.5 to 729 mg/kg. PAHs in surface and subsurface sediment reached 9.55 mg/kg and 0.46 mg/kg, respectively. Surface water exhibited TPH concentrations from 10 to 620 mg/L, while PAHs ranged from below detection limits to 1 mg/L. Groundwater TPH concentrations spanned 3 to 473 mg/L, with total PAHs varying from below detection limits to 0.28 mg/L. These elevated TPH and PAH levels indicate extensive petroleum contamination in the investigated sediment and water environment. Along with severe impacts on large areas of mangroves and wetlands, comparison of TPH and PAH concentrations with sediment and water quality criteria found 54 to 100% of stations demonstrated exceedances, suggesting adverse biological effects on aquatic and sediment biota are likely occurring.
|
|
Singh, A., Patel, S., Bhadani, V., Kumar, V., & Gaurav, K. (2024). AutoML-GWL: Automated machine learning model for the prediction of groundwater level. Engineering Applications of Artificial Intelligence, 127, 107405.
Abstract: Predicting groundwater levels is pivotal in curbing overexploitation and ensuring effective water resource governance. However, groundwater level prediction is intricate, driven by dynamic nonlinear factors. To comprehend the dynamic interaction among these drivers, leveraging machine learning models can provide valuable insights. The drastic increase in computational capabilities has catalysed a substantial surge in the utilisation of machine learning-based solutions for effective groundwater management. The performance of these models highly depends on the selection of hyperparameters. The optimisation of hyperparameters is a complex process that often requires application-specific expertise for a skillful prediction. To mitigate the challenge posed by hyperparameter tuning’s problem-specific nature, we present an innovative approach by introducing the automated machine learning (AutoML-GWL) framework. This framework is specifically designed for precise groundwater level mapping. It seamlessly integrates the selection of best machine learning model and adeptly fine-tunes its hyperparameters by using Bayesian optimisation. We used long time series (1997-2018) data of precipitation, temperature, evaporation, soil type, relative humidity, and lag of groundwater level as input features to train the AutoML-GWL model while considering the influence of Land Use Land Cover (LULC) as a contextual factor. Among these input features, the lag of groundwater level emerged as the most relevant input feature. Once the model is trained, it performs well over the unseen data with a strong correlation of coefficient (R = 0.90), low root mean square error (RMSE = 1.22), and minimal bias = 0.23. Further, we compared the performance of the proposed AutoML-GWL with sixteen benchmark algorithms comprising baseline and novel algorithms. The AutoML-GWL outperforms all the benchmark algorithms. Furthermore, the proposed algorithm ranked first in Friedman’s statistical test, confirming its reliability. Moreover, we conducted a spatial distribution and uncertainty analysis for the proposed algorithm. The outcomes of this analysis affirmed that the AutoML-GWL can effectively manage data with spatial variations and demonstrates remarkable stability when faced with small uncertainties in the input parameters. This study holds significant promise in revolutionising groundwater management practices by establishing an automated framework for simulating groundwater levels for sustainable water resource management.
|