Abstract: Unconventional hydrocarbon production has become the target of an intensive environmental debate due to the risks it poses to water resources. Fracking, while enabling the extraction of oil and gas from ultra-low permeability reservoirs, also possesses the risk of polluting water systems through failures from hydraulic fracturing and its associated procedures. The need to foster national industrial development with a transitional energy matrix has led Brazil to discuss the environmental suitability before producing its large unconventional reserves. Many studies have highlighted the need for a robust environmental characterization before the development of the unconventional industry. In this sense, multiple environmental isotopes may work as a proxy for identifying water contamination right from the early stages. Environmental isotopes may also be applied to enhance the understanding of the natural geochemical processes intrinsic to a given area. This study presents an environmental isotopes baseline for the groundwater and riverine water systems within the São Francisco Basin, a proven tight gas reservoir in Brazil, in a pre-operational context. δ18O, δ2H, 3H, δ13C, and Δ14C were evaluated in three different seasons in groundwater and surface water samples, along with other auxiliary parameters such as physical-chemical parameters (in situ), major ions, and d-excess. The δ2H and δ18O in surface water shows an upstream → downstream enrichment trend, with some variations suggesting baseflow interactions in the surface water systems. An evaporation line for the study area was defined as δ2H = 4.6903 δ18O + 10.362. δ13C indicates a mutual dissolution of silicates and carbonates in the groundwater system and suggests a group of samples highly related to the recharge areas. Groundwater dating denotes the Serra da Saudade Formation as a modern fractured aquifer with a strong recharge capacity. These findings support stakeholders in environmental monitoring and management of the unconventional gas industry.

Abstract: In this study, the application of the Well Reversal Technique (WRT) and the impact of reversal time on the efficiency of uranium mining via In-Situ Leaching (ISL) were investigated. A prevalent issue in ISL mineral extraction is the formation of stagnant zones caused by limited access of the lixiviant, which leads to increased operating expenditures. The WRT, which involves altering the function of some wells from injection to production or vice versa, is a potential solution to this problem. The efficiency of WRT is heavily dependent on the well pattern and reversal time. Two commonly used well patterns in ISL are the 9-spot (row arrangement) and 7-spot (hexagonal arrangement). The objective of this study was to determine the optimal reversal time for a 9-spot well pattern through mathematical modeling of hydrodynamic and physico-chemical processes and subsequent economic assessment. A mathematical model of uranium extraction processes was developed using the principles of mass conservation, Darcy’s, and mass action laws. The results obtained for a 9-spot well pattern without reversal, with two reversal options, and a 7-spot scheme were analyzed comparatively. The 7-spot scheme without reversal was found to be the most effective of the options examined. The application of WRT on a 9-spot well pattern allows to enhance production efficiency to a level comparable to that of a 7-spot well pattern. Additionally, the effect of reversal time on recovery was studied based on two well reversal options. The results from calculation revealed that the optimal scenario was when the well reversal is conducted immediately after the time point at which the average concentration of the pregnant solution in the production wells reaches its peak value. The overall efficiency of WRT application was determined through economic calculations of capital (CAPEX) and operating (OPEX) expenditures. Based on economic calculations, it was determined that the utilization of WRT results in a 3–18% increase in mineral production efficiency for a 9-point scheme, depending on the chosen reversal method.

Abstract: Vietnam is a country with a long coastline and a high population density residing in the coastal plains. The largest dry area in Vietnam, the coastal plain of Ninh Thuan province, always lacks water in the first dry months of the year (Jan., Feb., Mar., and Apr.). Groundwater is an extremely valuable resource for supplies at this time. Therefore, the objective of this study is to establish a comprehensive approach to sustainable groundwater management in this semi-arid region. This approach is not only mitigating the negative impacts of factors such as climate change, sea level rise, and socio-economic development but also suggesting measures for management of aquifer recharge. A groundwater model for a 3-layer system with variable density flow SEAWAT is built to predict the impacts of climate change and sea level rise without a change in groundwater abstraction. This model helps to understand the trend of salt intrusion and lowering groundwater level in the study area. Afterwards, scenarios with different ground water abstraction and groundwater development such as ground dam, infiltration basin have been set up to meet the demands of socio-economic development in the future. Predicted results will show the impacts of the groundwater systems in the area such as groundwater level change, and saltwater intrusion. Controlled groundwater abstraction and some measures of groundwater development such as infiltration basin, underground dam would allow for an increase of up to 50000m3/day in the year 2050 without negative impacts on the aquifer system.

Abstract: The environmental risks from shale gas extraction through the unconventional method of ‘fracking’ are considerable and impact on water supplies below and above ground. Since 2010 the recovery of natural shale gas through fracking has been proposed in parts of the fragile semi-arid ecosystems that make up the Karoo biome in South Africa. These unique ecosystems are heavily reliant on underground water, intermittent and ephemeral springs, which are at great risk of contamination by fracking processes. Diatoms are present in all water bodies and reflect aspects of the environment in which they are located. As the possibility of fracking has not been removed, the aim of the project was to determine if diatoms could be used for rapid biomonitoring of underground and surface waters in the Karoo. Over a period of 24 months, water samples and diatom species were collected simultaneously from 65 sites. A total of 388 diatom taxa were identified from 290 samples with seasonal and substrate variation affecting species composition but not the environmental information. Species diversity information, on the other hand, often varied significantly between substrates within a single sample. Analysis using CCA established that the diatom composition was affected by lithium, oxidized nitrogen, electrical conductivity, and sulphate levels in the sampled water. We conclude that changes in diatom community composition in the Karoo do reflect the water chemistry and could be useful as bioindicators.

Abstract: Groundwater resources around the world required periodic monitoring in order to ensure the safe and sustainable utilization for humans by keeping the good status of water quality. However, this could be a daunting task for developing countries due to the insufficient data in spatiotemporal resolution. Therefore, this research work aimed to assess groundwater quality in terms of drinking and irrigation purposes at the adjacent part of the Rooppur Nuclear Power Plant (RNPP) in Bangladesh. For the purposes of achieving the aim of this study, nine groundwater samples were collected seasonally (dry and wet season) and seventeen hydro-geochemical indicators were analyzed, including Temperature (Temp.), pH, electrical conductivity (EC), total dissolved solids (TDS), total alkalinity (TA), total hardness (TH), total organic carbon (TOC), bicarbonate (HCO3−), chloride (Cl−), phosphate (PO43−), sulfate (SO42−), nitrite (NO2−), nitrate (NO3−), sodium (Na+), potassium (K+), calcium (Ca2+) and magnesium (Mg2+). The present study utilized the Canadian Council of Ministers of the Environment water quality index (CCME-WQI) model to assess water quality for drinking purposes. In addition, nine indices including EC, TDS, TH, sodium adsorption ratio (SAR), percent sodium (Na%), permeability index (PI), Kelley’s ratio (KR), magnesium hazard ratio (MHR), soluble sodium percentage (SSP), and Residual sodium carbonate (RSC) were used in this research for assessing the water quality for irrigation purposes. The computed mean CCME-WQI score found higher during the dry season (ranges 48 to 74) than the wet season (ranges 40 to 65). Moreover, CCME-WQI model ranked groundwater quality between the “poor” and “marginal” categories during the wet season implying unsuitable water for human consumption. Like CCME-WQI model, majority of the irrigation index also demonstrated suitable water for crop cultivation during dry season. The findings of this research indicate that it requires additional care to improve the monitoring programme for protecting groundwater quality in the RNPP area. Insightful information from this study might be useful as baseline for national strategic planners in order to protect groundwater resources during the any emergencies associated with RNPP.