| Home | [21–30] << 31 32 33 34 35 36 37 38 39 40 >> [41–50] |
|
Karaimeh, S. A. (2019). Maintaining desert cultivation: Roman, Byzantine, and Early Islamic water-strategies at Udhruh region, Jordan. Journal of Arid Environments, 166, 108–115.
Abstract: The site of Udhruh is located in the arid desert of southern Jordan, about 15 km to the east of Petra. The site was built by the Nabataeans but expanded by the Romans (as a defensive site) and was continuously occupied until the Early Islamic period. It receives less than the 200 mm of annual precipitation, which is crucial for agricultural cultivation. Archaeological evidence from earlier excavations together with new data from several survey projects indicate that areas around Udhruh were cultivated throughout the Roman, Byzantine, and Early Islamic periods (300 BCE–800 CE). The fundamental question is: how did the people of Udhruh sustain their community in the desert, and how did they transform the desert into arable land? The landscape could be utilised thanks to sophisticated water management and irrigation techniques. At least four underground qanat systems were identified providing Udhruh with access to groundwater. At the terminal end of the qanat systems, several types of closed surface channels conveyed the water to reservoirs, which subsequently distributed the water to the field systems. The water systems of Udhruh differ from the well-known Nabataean systems in the surrounding area. As Udhruh was taken over by the Roman army in 106 CE, this study analyses how the Nabataean water systems continued to function and adapt through the Roman and Byzantine periods. A complete understanding of Udhruh’s water systems helps to reconstruct past land use, agricultural activity, and irrigation practices in a currently arid region.
|
|
Jamali, B., Bach, P. M., & Deletic, A. (2020). Rainwater harvesting for urban flood management – An integrated modelling framework. Water Research, 171, 115372.
Abstract: It is well known that rainwater harvesting (RWH) can augment water supply and reduce stormwater pollutant discharges. Due to the lack of continuous 2D modelling of urban flood coverage and its associated damage, the ability of RWH to reduce urban flood risks has not been fully evaluated. Literature suggests that small distributed storage spaces using RWH tanks will reduce flood damage only during small to medium flooding events and therefore cumulative assessment of their benefits is needed. In this study we developed a new integrated modelling framework that implements a semi-continuous simulation approach to investigate flood prevention and water supply benefits of RWH tanks. The framework includes a continuous mass balance simulation model that considers antecedent rainfall conditions and water demand/usage of tanks and predicts the available storage prior to each storm event. To do so, this model couples a rainfall-runoff tank storage model with a detailed stochastic end-use water demand model. The available storage capacity of tanks is then used as a boundary condition for the novel rapid flood simulation model. This flood model was developed by coupling the U.S. EPA Storm Water Management Model (SWMM) to the Cellular-Automata Fast Flood Evaluation (CA-ffé) model to predict the inundation depth caused by surcharges over the capacity of the drainage network. The stage-depth damage curves method was used to calculate time series of flood damage, which are then directly used for flood risk and cost-benefit analysis. The model was tested through a case study in Melbourne, using a recorded rainfall time series of 85 years (after validating the flood model against 1D-2D MIKE-FLOOD). Results showed that extensive implementation of RWH tanks in the study area is economically feasible and can reduce expected annual damage in the catchment by up to approximately 30 percent. Availability of storage space and temporal distribution of rainfall within an event were important factors affecting tank performance for flood reduction.
|
|
Brook, G. A., Marais, E., Srivastava, P., & Jordan, T. (2007). Timing of lake-level changes in Etosha Pan, Namibia, since the middle Holocene from OSL ages of relict shorelines in the Okondeka region. Quaternary International, 175(1), 29–40.
Abstract: In 2003 examination of aerial photographs revealed a series of previously unknown relict shorelines on the arcuate ridge, possibly a clay lunette dune, that marks the western boundary of Etosha Pan in Namibia. The shorelines are 120–600m wide and the most prominent extend for tens of km around the lunette dune. The shorelines were examined on the ground in 2004 and an attempt was made to date the three lowest levels at ca. 5, 2.5 and 1m above the present pan surface. The OSL ages obtained indicate higher and more prolonged lake conditions than today at ca. 6.4, 4.0 and 2.1ka with the youngest shoreline sediments resting on an ancient pan surface dating to ca. 13ka. The evidence indicates dry conditions in the pan at ca. 13ka, wetter conditions and higher lake levels in the middle Holocene followed by a decline in lake levels to the present. Periods of inundation were of sufficient duration to produce shorelines at the southwestern end of the pan due to the prevailing northeasterly winds that would have maximized wave action along this section of the pan margin. The Etosha findings, together with other regional paleoclimate data, suggest four periods of increased wetness in SW Africa during the Holocene at 7–5, 4.5–3.5, 2.5–1.7 and ca. 1.0ka. There is widespread evidence for the oldest of these periods suggesting that it was a prominent and widespread interval of wetness. Prior to ca. 8.0ka the climate may have been drier than today.
|
|
Dutova, E. M., Nikitenkov, A. N., Pokrovskiy, V. D., Banks, D., Frengstad, B. S., & Parnachev, V. P. (2017). Modelling of the dissolution and reprecipitation of uranium under oxidising conditions in the zone of shallow groundwater circulation. Journal of Environmental Radioactivity, 178-179, 63–76.
Abstract: Generic hydrochemical modelling of a grantoid-groundwater system, using the Russian software “HydroGeo”, has been carried out with an emphasis on simulating the accumulation of uranium in the aqueous phase. The baseline model run simulates shallow granitoid aquifers (U content 5 ppm) under conditions broadly representative of southern Norway and southwestern Siberia: i.e. temperature 10 °C, equilibrated with a soil gas partial CO2 pressure (PCO2, open system) of 10−2.5 atm. and a mildly oxidising redox environment (Eh = +50 mV). Modelling indicates that aqueous uranium accumulates in parallel with total dissolved solids (or groundwater mineralisation M – regarded as an indicator of degree of hydrochemical evolution), accumulating most rapidly when M = 550–1000 mg L−1. Accumulation slows at the onset of saturation and precipitation of secondary uranium minerals at M = c. 1000 mg L−1 (which, under baseline modelling conditions, also corresponds approximately to calcite saturation and transition to Na-HCO3 hydrofacies). The secondary minerals are typically “black” uranium oxides of mixed oxidation state (e.g. U3O7 and U4O9). For rock U content of 5–50 ppm, it is possible to generate a wide variety of aqueous uranium concentrations, up to a maximum of just over 1 mg L−1, but with typical concentrations of up to 10 μg L−1 for modest degrees of hydrochemical maturity (as indicated by M). These observations correspond extremely well with real groundwater analyses from the Altai-Sayan region of Russia and Norwegian crystalline bedrock aquifers. The timing (with respect to M) and degree of aqueous uranium accumulation are also sensitive to Eh (greater mobilisation at higher Eh), uranium content of rocks (aqueous concentration increases as rock content increases) and PCO2 (low PCO2 favours higher pH, rapid accumulation of aqueous U and earlier saturation with respect to uranium minerals).
|
|
Bullock, L. A., & Parnell, J. (2017). Selenium and molybdenum enrichment in uranium roll-front deposits of Wyoming and Colorado, USA. Journal of Geochemical Exploration, 180, 101–112.
Abstract: Sandstone uranium (U) roll-front deposits of Wyoming and Colorado (USA) are important U resources, and may provide a terrestrial source for critical accessory elements, such as selenium (Se), molybdenum (Mo), and tellurium (Te). Due to their associated toxicity, MoSeTe occurrences in roll-fronts should also be carefully monitored during U leaching and ore processing. While elevated MoSe concentrations in roll-fronts are well established, very little is known about Te occurrence in such deposits. This study aims to establish MoSeTe concentrations in Wyoming and Colorado roll-fronts, and assess the significance of these deposits in an environmental and mineral exploration context. Sampled roll-front deposits, produced by oxidized groundwater transportation through a sandstone, show high MoSe content in specific redox zones, and low Te, relative to crustal means. High Se concentrations (up to 168ppm) are restricted to a narrow band of alteration at the redox front. High Mo content (up to 115ppm) is typically associated with the reduced mineralized nose and seepage zones of the roll-front, ahead of the U orebody. Elevated trace element concentrations are likely sourced from proximal granitic intrusions, tuffaceous deposits, and local pyritic mudstones. Elevated MoSe content in the sampled roll fronts may be regarded as a contaminant in U in-situ recovery and leaching processing, and may pose an environmental threat in groundwaters and soils, so extraction should be carefully monitored. The identification of peak concentrations of MoSe can also act as a pathfinder for the redox front of a roll-front, and help to isolate the U orebody, particularly in the absence of gamma signatures.
|